Installation and configuration manual HBIB February - 2020 WWW.HBPRODUCTS.DK
2 / 6
Table of Contents
......................................................................................... 1
.................................................................................. 2
................................................................................ 2
.......................................................................................... 3
Wiring the sensor
.................................................................................. 3
Sensor setup
........................................................................................ 4
Initial setup and calibration
..................................................................... 5
...................................................................................... 6
....................................................................................... 6
Safety Instructions
CAUTION! Always read the operational guidelines before commencing work! Read all warnings
Installation of HBIB requires technical knowledge of both refrigeration and electronics. Only qualified
personnel should work with the product. The technician must be aware of the consequences of an improperly
installed sensor and must be committed to adhering to the applicable local legislation.
If changes are made to type-approved equipment, this type approval becomes void. The product's input and
output, as well as its accessories, may only be connected as shown in this guide. HB Products assumes no
responsibility for damages resulting from not adhering to the above.
Explanation of the symbol for safety instructions. In this guide, the symbol below is used to point out
important safety instructions for the user. It will always be found in places in the chapters where the
information is relevant. The safety instructions and the warnings in particular, must always be read and
adhered to.
CAUTION! Refers to a possible limitation of functionality or risk in usage.
NOTE! Contains important additional information about the product and provides further tips.
The person responsible for operation must commit to adhering to all the legislative requirements,
preventing accidents, and doing everything so as to avoid damage to people and materials.
Intended use, terms of use. The HBIB ice bank sensor is designed for measuring ice formation on
evaporators, brine tubes and similar in water. If the HBIB is to be used in a different way and if the operation
of the product in this function is determined to be problematic, prior approval must be obtained from HB
Products.
Preventing collateral damage: Make sure that qualified personnel assess any faults and take necessary
precautions before attempting to make replacements or repairs, to avoid collateral damage. Disposal
instructions: HBIB is constructed so that the modules can easily be removed and sorted for disposal.