11
Alarms
Your HazSim Pro 1.0 system has several factory preset alarms based on industry standards
but may not be the same as your local protocol. Select the Edit Alarm button and the
Alarm edit window will open as shown in Figure 09.
Alarms - Several alarms are preset at the factory based on general industry data
Figure 09 - Alarm Edit Window
Add Alarm - to add a new alarm select ‘Add Alarm’ on the Alarm edit window and a new
alarm field will be added to the list starting from the bottom. The default new alarm will
be for O2. Change the data fields for each, with the first window the gas, the next the low
alarm (zero for all but O2) and the high alarm reading, then close the window. To remove
an alarm select Remove Alarm and the alarms will be deleted one by one starting from the
bottom. Any alarm already in the list can be changed by clicking in the box and changing
the value. For example: If CO is currently set to 30 and you would like it to be 29 simply
change the value to 29 and close the alarm edit box.
