[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-375 •
]
^
hazet.de
222644
II
.04.2017/
∞
be/114
This Brake Fluid Tester measures the boiling point of the brake
fluid in order to determine the degree of contamination.
For Your Safety
Please read this application note
before use!
Wear safety glasses
Elements of the device
•
Brake Fluid Tester
•
Battery connexions
•
Measuring probe with protection sleeve
Included
• Brake Fluid Tester
• Pipette and Cup
• Plastic Case
Storage
Store Brake Fluid Tester as
indicated below:
• Do not store outdoors.
• Store in a dry and dust-free place.
• Do not expose to liquids or aggressive substances.
• Storage temperature -20° up to +70°C
• Relative air humidity max. 85%
Disposal
• Dispose of in compliance with guidelines for environmental
protection and work safety.
• Components can be recycled.
Technical Information
Test time:
15 - 45 sec.
Operating voltage: 12V DC (direct current) 6.5 up to 8.0 A max.
Measuring accuracy 100° up to 180°C:
1% up to 3% max.
Measuring accuracy above 180°C:
3% up to 5% max.
Suitable brake fluids:
DOT 3, DOT 4, DOT 5.1
Working temperature:
0° – 50° C
Relative humidity:
10% – 85%
not condensing
Maintenance and Cleaning
• Keep in a clean and dry place.
• Do not let fall down. Do not expose to impacts or liquids as
they might affect the functionality and damage the Caliper
Gauge.
• Clean surfaces with a dry cotton cloth only.
NOTE:
Determine DOT-class of brake fluid to be
checked, before starting to measure. Refer to
vehicle manufacturer‘s specifications.
Use
• Connect the tester with its pole terminals to a
12V car battery.
• Take off protection cap from the probe and immerse the
probe as deeply into the fluid to be measured until its lateral
admission opening is completely under the surface.
• Follow the instructions on the display.
Application Note
Brake Fluid
Tester
4954-1
