Hazet 161 N-5D, Operating Instructions Manual

Page: 9 / 16

9
HAZET-WERK Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-400 •
^
hazet.de •
]
export@hazet.de
1. General information
• Please make sure that the user of the
HAZET socket strip carefully reads these
operating instructions and fully understands
all the information provided before using the
it for the first time.
• These operating instructions contain impor-
tant advice that is necessary for the safe
and trouble-free operation of your HAZET
socket strip.
• Intended use of the HAZET socket strip
requires adherence to all the safety instruc-
tions and other information in these operat-
ing instructions.
• For this reason, always keep these operat-
ing instructions together with your HAZET
socket strip.
• HAZET emphasises that any modification
to this socket strip and/or use in a way that
does not correspond to its intended appli-
cation is strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper or inappropriate use, misuse
of the tool, or from a disregard of the safety
instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents valid for the application area of the
HAZET socket strip must be observed and
respected.
1
For your information
2. Explanation of symbols
ATTENTION: Pay strict attention
to these symbols!
READ THE OPERATING INSTRUCTIONS!
The owner of this tool is
obliged to observe the
operating instructions and
instruct any users of this tool
according to the operating
instructions.
NOTE!
This symbol indicates advice
that is helpful when using the
tool.
WARNING!
This symbol indicates impor­
tant descriptions, dangerous
conditions, safety risks and
safety advice.
CAUTION!
This symbol indicates advice
which, if disregarded, results
in damage, malfunction and/
or functional failure of the
tool.
QUALIFIED PERSONNEL!
The tool may be used by
qualified personnel only.
Handling by non­qualified
people may lead to injuries to
persons or damage to the tool
or the workpiece.
Electrical energy may cause serious injuries!
Always wear personal protective equipment!