Hazet 161 N-5D Operating Instructions Manual Download Page 10

10

 

^

 hazet.com • 

]

 [email protected]

 

2.   Intended   

use

Operational reliability is only guaranteed if the 

tool is used as intended in accordance with 

the information in the operating instructions. In 

addition to the safety advice in these operating 

instructions, the general safety regulations, 

accident prevention regulations and environ-

mental protection regulations valid for this 

device's application range must be observed 

and respected. Use and maintenance must 

always comply with relevant local and national 

regulations. Please make sure that any person 

using this tool or carrying out maintenance 

work carefully reads and fully understands 

these operating instructions before using the 

tool.

•  Any deviation from the intended use and/

or any misapplication of the devices is 

not permitted and will be considered as 

improper use.

•  Any claims against the manufacturer and/

or its authorised agents because of dam-

age caused by improper use of the devices 

are void.

•  Any personal injury or material losses caused 

by improper use are the sole responsibility 

of the owner.

  

1.   Owner's   

liability 

•  This device was developed and manufac-

tured according to the technical norms and 

standards valid at the time and is considered 

to be operationally reliable. Nevertheless, 

the tool may present a danger when it is not 

used as intended or used in an inappropri-

ate way by non-qualified personnel.

•  Please make sure that any person using 

this tool or carrying out maintenance work 

carefully reads and fully understands these 

operating instructions before using the tool.

•  Modifications of any kind or any additions or 

modifications to the device are prohibited.

•  All safety, warning and operating infor-

mation on the tool must be kept legible. 

Immediately replace any damaged labels 

or stickers. 

•  All specified installation values or setting 

ranges must be observed.

•  Always keep the operating instructions 

close to the tool.

•  The tool may only be used if it is in good 

working order.

•  All safety equipment must always be within 

reach and should be checked regularly.

2

 For your safety

Electrical energy may cause serious injuries!  
Always wear personal protective equipment! 

Summary of Contents for 161 N-5D

















Reviews: