14
Always wear personal protective clothing and safety equipment!
2. Intended use
Operational reliability is only guaran-
teed if the tool is used as intended in
accordance with the information in the
operating instructions. In addition to the safe-
ty advice in these operating instructions, the
general safety regulations, regula tions for the
prevention of accidents and regulations for
environmental protection valid for the applica-
tion area of this tool have to be observed and
respected.
Always ensure electric tools are used, inspected
and maintained in compliance with the respec-
tive local, state, national or federal regulations.
• The HAZET cordless impact wrench is a handy,
battery operated tool for trade use. It is used to
loosen and tighten screw connections, and is
equipped with an MD-limit.
• 2 torque tightening stages
Stage 1 = 80 Nm
Stage 2 = 540 Nm
NOTE:
Every screw connection must be tigh-
tened/checked with a suitable torque
wrench.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
easy reach and should be checked regularly.
• Any incorrect use of the cordless impact
wrench or use that fails to comply with the
safety instructions can result in serious injury or
even death.
• Any other kind of use and/or use that goes
beyond the intended use of the tool is prohibi-
ted and is deemed to be improper.
• Any claims against the manufacturer and/or its
authorized agents because of damage caused
by improper use of the device are void.
• Any personal injury or material losses caused
by improper use of the tool are the sole respon-
sibility of the owner.
1. General aspects
This tool was developed and manufac-
tured according to the technical norms
and standards valid at the time and is
considered to be operationally reliable.
Nevertheless, the tool can present a danger
when it is improperly used or not used as inten-
ded by non-professionally trained personnel.
Please make sure that any person using this
tool or carrying out maintenance work carefully
reads these operating instructions and fully
understands all information given before using
the tool.
• Always keep the operating instructions close
to the tool.
• Any modification of the tool is strictly forbid-
den.
• All safety, warning and operating instructions
on the tool must always be kept in an easily
legible condition. Immediately replace all
damaged labels or stickers.
• All indications concerning setting values and
setting ranges must be observed.
2
For your safety
Summary of Contents for 9212-2
Page 23: ...23 Notizen Notes ...
