26
^
hazet.com
•
]
Setting the torque stages:
The HAZET cordless impact wrench features a torque-stage control for the 3 torque stages.
Press the control button on the handle to set the desired torque stage.
• Stage 1: the HAZET cordless impact wrench is limited to 180 Nm of torque.
• Stage 2: the HAZET cordless impact wrench is limited to 400 Nm of torque.
• Stage 3: the HAZET cordless impact wrench is limited to 1000 Nm of torque.
Note:
The torque limit only acts in the tightening direction.
When disengaged, the full power of the HAZET cordless impact wrench
takes effect. It may be set by pressing the control button
on the handle.
Note:
After tightening the preset torque, the screw connections
must be tightened/checked with a suitable torque wrench.
Tightening screws with the HAZET cordless impact wrench
only is not permitted.
Operation:
• Press and hold down the control button. The tool is running.
• Release the control button. The tool stops.
• The velocity/speed is controlled by the control button. Press the
control button a little for low velocity and more for higher velocity / speed.
LED work light:
The HAZET cordless impact wrenches are equipped with an LED work light. This work light
switches on automatically whenever the tool is activated and ensures optimum illumination
of the work area, even in dark working conditions. The work light switches off automatically
15 seconds after the tool is deactivated.
3
Design and function
Electrical energy may cause serious injuries!
Always wear personal protective equipment!
