Page 6 / 7
WORK CYCLE
Important !
Before fitting the plug, make sure the power voltage corresponds to that on the CE marking plate.
Make sure the power plug is correctly fitted in the power socket
Make sure the flexible hose is properly fitted and locked in the vacuum pipe union
Make sure the power cable and any extension used are integral and in perfect condition.
Bloc the vacuum cleaner by means of the retainer provided.
Grip one end of the flexible hose complete with selected accessory
Position the lever switch of the motors to be operated on ‘’ START ‘’ to start suction.
To stop suction, position the switches on ‘’ STOP ‘’
After finishing work, disconnect the vacuum cleaner from the power socket.
Caution !
Before switching the vacuum cleaner back on, make sure the motors have come to a complete halt.
Important !
While performing these operations, it is best to wear a dust protection mask.
To prevent having to use a dust protection mask and for greater convenience, before
Starting vacuuming operations, it is best to fit a nylon bag inside the container and to fasten this in place with the
special accessory available on request.
Important !
Perform the container release operation by means of the levers located on the siders or on the handle with BOTH
HANDS! Danger of crushing upper limbs when fitting and locking the container on the vacuum cleaner.
Caution !
During vacuuming, avoid rolling up or twisting the flexible hose.
On the front of the vacuum cleaner is a vacuum meter indicating the degree of vacuum inside the vacuum
cleaner.
If, with the vacuum cleaner working and the suction outlet free, the arrow on the vacuum meter shows an
irregular vacuum, the filter will have to be shaken by means of the lever provided
ı
f vacuum continues to be
excessive, the filter will have to be cleaned and changed.
Caution !
Never use the machine with the filter blocked.
Caution !
If after filter cleaning, the vacuum meter arrow still indicates excessive vacuum, the hose or suction accessory
could be blocked. If necessary, clean and eliminate the blockage.
INFORMATIVE NOTES
This section describes the control and special maintenance operations crucial for keeping the vacuum cleaner in
perfect working condition.
Any other jobs which might be necessary to eliminate operating faults must be expressly authorized by the
manufacturer.
In such cases, always notify the identification details of the cleaner.
In the case of major repairs, it is best to contact an authorized dealer, whose skilled personnel, backed by all the
technological experience relation to the original factory construction methods, are always available and ready to
promptly intervene.
GENERAL SAFETY PRECAUTIONS
Maintenance jobs must always be performed by skilled technicians. Trained to carry out their specific job. In the
case of this machine, these are : Mechanical maintenance and Electrical maintenance
The Safety Manager has the precise duty of determining the professional capacities and skills of such persons.
Before doing any maintenance job, safety manager must:
