Hayward KingShark, Owner'S Manual

Page: 16 / 20

KingShark2
PREVENTATIVE MAINTENANCE
Congratulations on the purchase of the KingShark2. The KingShark2 is built
and designed to give you years of service.
In order to maximize efficiency and receive long term service, we suggest
the following:
Thoroughly rinse entire unit after use.
Clean filters thoroughly after each use - a clogged filter will decrease
efficiency dramatically.
Remove any twists in the cord after each use. Twisting should be minimal
if the unit is functioning properly.
Avoid allowing the unit to “cool down” in the water. For example, if used
on a timer, it is better to set for 3:00 a.m. to 8:00 a.m. (then remove) than
it is to set for 12:00 a.m. to 5:00 a.m. (and remove it at 8:00 a.m.).
Inspect belts and filter frequently. Replace when necessary.
Always keep your Sensor Bar level; (a non-level Sensor Bar can cause
the cord to twist).
Protect Your Investment!
Following these quick and easy steps will extend the life and efficiency of
your KingShark2.
1.
2.
3.
4.
5.
6.
KingShark2
1
3