Wheel or Bearing Removal & Replacement
3
1
2
CLICK
4
5
7
6
When the unit is reassembled turn the right front wheel (looking from behind) and make sure everything turns smoothly.
Skirt and Inlet Removal & Replacement
Inlet Sizes:
Small*
Medium
small pump/variable speed
average pump
low flow
normal flow
L
R
1
2
3
Turn the unit upside down
Remove the inlet.
Once the inlet is removed you
and press with both fingers
can remove any debris that is
on both sides of the inlet.
in the turbine chamber. You can
While pushing down pull
also remove and replace the
up on the inlet.
skirt/bracket assemblies. One
of the middle skirt/brackets can
be easily pulled out. Once one
assembly is out you can slide
the others out easily to replace.
7
*Low flow applications may affect cleaners ability to climb walls.
Large
large pump
high flow
4
Once any debris has been
removed or the skirts have been
replaced replace the inlet. Note
it can only be inserted in one
direction and once it is in it
should clip on both sides. Note:
if it does not clip in then you
have it the wrong way around (it
is marked L and R).
