FEATURES
SELF ADJUSTING TURBINE VANES
All the cleaners have the patented self-adjusting turbines, which maximize the power from the water flow. This turbine is
similar to a paddle wheel with blades that are adjustable. This feature allows the cleaner to still move at low suction and low
pressure. In addition the folding vanes of the turbine allow for the easy passage of larger debris through the cleaner.
STEERING SYSTEM
The 2x and 4x Suction cleaner have an internal programmed steering system, that causes the left wheel to periodically
reverse, allowing the cleaner to turn and then move into another direction. For the 2x Suction cleaner there are five different
programmed turns ranging from 90 to 450 degrees. For the 4x Suction Cleaner there are three different programmed turns
ranging from 90 to 540 degrees. This feature allows the cleaner to cover not only the deep end, but also the shallow end.
This steering system allows for the 2x Suction cleaner to travel 8 to 10 ft. before it turns, and the 4x Suction cleaner will travel
11 to 14 ft. before it turns. The cleaner cleans more in the shallow end than any other cleaner. The cleaner has no problem with
uneven surfaces or strange shapes. It won’t stick in a corner, or get hung up by a main drain.
ROBUST TIRE TREADS
One look and you will see that the patented tire treads give the cleaner better climbing ability and obstacle maneuverability.
The tires come with tread wear markers that show you when to replace your tires. The front tires of the cleaner have humps
(raised treads) that allow the cleaner to overcome any reasonable obstacles such as the main drain and uneven surfaces. This
makes the Cleaner ideal for all pool surfaces and shapes.
SELF-CLEANING SWIVEL
This is a feature that allows the cleaner to turn freely without interference from the hose due to debris buildup in the swivel
hose cone. By self-cleaning, the swivel prevents the hose from coiling. (Note: Sometimes with severe debris one needs to
hold it under a water faucet for cleaning).
WALL CLIMBING
Cleaner will only climb walls on pools with sufficient floor to wall radius.
The cleaner has patented adjustable skirts that allow the cleaner to maintain optimal suction under the machine even when
it encounters obstacles. When the Cleaner encounters an obstacle one (or more) of the skirts will lift up (adjust) over the ob
stacle while maintaining suction under the cleaner.
SAFETY FACTS
• DO NOT
use to remove large debris in new pools.
• REMOVE
the cleaner before chemically shocking your pool.
• DO NOT
swim with cleaner
• Store the cleaner in a shaded safe area.
• Hoses must be stored straight.
DO NOT
coil the hoses.
• Keep away from children and pets.
• REMOVE
cleaner when performing backwash.
• REMEMBER SAFETY FIRST
1
