background image

PRODUCT SPECIFICATIONS

Hayward Pool Products Worldwide Locations

Hayward Corporate

Headquarters

Hayward Pool Products, Inc.

900 Fairmount Avenue

Elizabeth, NJ 07207, USA

Tel:  908 351 5400

Fax: 908 351 5675

Hayward Pool Products, Inc.

2875 Pomona Boulevard

Pomona, CA 91768, USA

Tel:  909 594 1600

Fax: 909 598 6905

Hayward Pool Products

Canada, Inc.

2880 Plymouth Drive

Oakville, Ontario

CANADA, L6H 5R4

TEL: 905 829 2880

FAX: 905 829 3636

Hayward Pool Products Europe:

Parc Industriel de la Plaine de L‘Ain

Allee Des Chenses

01150 Saint Vulbas

FRANCE

TEL:  33 4 74 46 24 70

FAX:  33 4 74 46 24 87

Hayward Iberica S.A.

Carretera Nacional III, KM 333, 7

Nave 2

E-46930 Quart De Poblet,

Valencia, SPAIN

TEL: 34 6 152 3454

FAX: 34 6 152 3357

Hayward/IMG

International Marketing Group

801 Corporate Center Drive,

Suite 110

Pomona, CA 91768, USA

Tel:  909 620 4041

Fax: 909 620 1249

For further information or consumer technical support, please call (East Coast) 908-351-5400, 

(West Coast) 909-594-1600  or visit our web site at www.haywardnet.com

12.21”

6.50”

4.80”

4.63”

10.00”

12.19”

Dimensions varies
with wall thickness

8.156”

.850”

8.150”

6.50”

.850”

7.9”

DuraNiche™

SP0600U

DuraNiche™

SP0601U

Niche Cover-SP0600J

SPX0555Z2- Bolts (1)

Niche Cover-SP0601N

DuraNiche™

SP0607U

NOTE: These items are protected by the following patents:
#5.432.688.  Other patents pending

SPX0507A1- Faceplate

SPX0507D- Backup 

Ring

SPX0506D-

Gaskets (2)

SPX0555Z2-

Bolts (1)

SPX0607Z1A-  Screw Set 10 pcs. (1)

10.0”

10.0”

9.69”

11.13”

Summary of Contents for DuraNiche

Page 1: ... by Article 680 22 of the NEC The NEC requires that the bonding wire be AWG 8 or larger Local codes may require a continuous loop and may require that the bonding point on the fixture housing niche be encapsulated The inside connection is the grounding connector as required by Article 680 20 b of the NEC The NEC requires that where a nonmetallic conduit is used an AWG 8 insulated copper conductor ...

Page 2: ...OID ANY INSPECTION AUTHORITY ISSUES WITH THIS REQUIREMENT 2 Once the niche s has been securely positioned wedged in the rebar it must be securely tied to the rebar with tie wire Before tying niche in place make certain that niche is vertical plumb and square to the form and that top of niche where retaining screw is located is at highest point at the 12 O Clock posiiton The flanges of Niche Models...

Page 3: ...sket in place Two large holes in gasket will fit over the pan heads of the securing screws 6 If vinyl lined pool install liner before proceeding with Step 7 7 Align second gasket not required for fiberglass pools without liner and face plate and fasten tightly to shell assembly with ten 10 No 13 x 1 flat head self tapping screws provided Use a properly sized Phillips screwdriver to tighten these h...

Page 4: ...III KM 333 7 Nave 2 E 46930 Quart De Poblet Valencia SPAIN TEL 34 6 152 3454 FAX 34 6 152 3357 Hayward IMG International Marketing Group 801 Corporate Center Drive Suite 110 Pomona CA 91768 USA Tel 909 620 4041 Fax 909 620 1249 For further information or consumer technical support please call East Coast 908 351 5400 West Coast 909 594 1600 or visit our web site at www haywardnet com 12 21 6 50 4 8...

Reviews: