b. Thread the wall mount power supply’s output connector from behind and
through the opening in the left side of the baseplate. See Fig. 2.
c.
Screw the baseplate in the desired position (screws supplied by installer).
d. Plug the power supply’s output connector into the mating connector on the
back of the AQL2-Wx-RF-PS-x.
e.
Reattach the wireless remote display/keypad to the baseplate.
f.
Plug the power supply into a 120VAC outlet.
AQL2-Tx-RF-PS-x and AQL2-Tx-RF-P-4 Table Top models
The AQL2-Tx-RF-P-4 requires a Pro Logic P-4 model. The AQL2-Tx-RF-PS-x requires
a Pro Logic PS model or an Aqua Logic PS model operating with software revision
r2.00 or higher.
1.
Base Station required:
Requires the use of an AQL2-BASE-RF base station.
2.
Select Location:
Because both models are battery operated and designed to be
portable, there are no power supply or mounting concerns like the wall mount
units. The table top units are intended to be used in the normal living space, with
these considerations:
Protected from the weather:
The wireless remote display/keypad should be
used indoors or in a weather protected area (rain should never hit the wire-
less remote display/keypad). Understand that areas that protect the unit
from rain, may still allow condensing humidity (dew, mist, fog, etc.) which
can damage the AQL2-Tx-RF-PS-x and AQL2-Tx-RF-P-4 over time. Because
the unit is portable and may be used in different areas around the pool and
home, it's important to understand that it is NOT water resistant and can be
easily damaged if used in the wrong manner.
2
9
Push Screwdriver
blade through slot
and pull up
cover
Bezel
(use is optional)
back of baseplate
Fig. 1
Fig. 2
