USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
2
COMPATIBILITY:
This remote display is compatible with all Pro Logic PS-4/8/16 models and for
all Aqua Logic PS-4/8/16 systems running main software r2.00 or higher.
Installation
Mounting
The AQL2-Wx-PS-x Remote Display must be mounted indoors or in a weather protected area (rain
should never hit the remote display). Up to 3 remote displays can be installed. The remote display is
designed to mount onto a standard electrical utility box (same size as used for a triple light switch)
or can be mounted directly onto any wall surface. When selecting a location, note that the wire to the
Pro Logic/Aqua Logic main unit must be no more than 500 ft (160m) long. Follow the steps below:
1. Remove the remote display baseplate from the cover by inserting a screwdriver in the slot
shown below. Lift up on the cover while pushing gently with the screwdriver.
2. If bezel will be used, snap baseplate into bezel before mounting.
3. Screw the baseplate in the desired position (screws supplied by installer).
Push Screwdriver
blade through slot
and pull up
cover
Bezel
(use is optional)
