4
2
do
PASO
;
Conecte las mangueras.
3
er
PASO
;
Conéctela al limpia fondos.
+1
+1
3.
2.
1.
50-60 cm (20-25”)
4
STEP 2
STEP 2
Connecting the hoses . . .
1. Take the Leader Hose (the one with the gray cuff) and attach the float halves 24 inches
(60 cm) from the gray end. OR if you have the 2 snap on floats snap them at 20 to 25
inches from the gray cuff. This is the section of hose that attaches to the POOLCLEANER
™
in Step 3. (
We have already done this step for you).
2. Connect all the hoses (except the Leader Hose).
Connect male to female. If need be wet the hoses
for easier assembly. Now connect Leader Hose to
the end.
3. The connected hoses should be one to two
lengths longer than the furthest point from the
vacuum source (skimmer or wall fitting).
20-25" (50-60cm)
Gray Cuff
4
STEP 2
STEP 2
Connecting the hoses . . .
1. Take the Leader Hose (the one with the gray cuff) and attach the float halves 24 inches
(60 cm) from the gray end. OR if you have the 2 snap on floats snap them at 20 to 25
inches from the gray cuff. This is the section of hose that attaches to the POOLCLEANER
™
in Step 3. (
We have already done this step for you).
2. Connect all the hoses (except the Leader Hose).
Connect male to female. If need be wet the hoses
for easier assembly. Now connect Leader Hose to
the end.
3. The connected hoses should be one to two
lengths longer than the furthest point from the
vacuum source (skimmer or wall fitting).
20-25" (50-60cm)
Gray Cuff
5
20
-2
5”(
50-6
0
CM
)
