9
Printed in China
All rights reserved
© 2020 - Hayter Limited
Spellbrook, Bishop’s Stortford, Herts CM23 4BU
1
2
3
4
6
5
7
8
Figure 2
1.
Battery pack cavity
5.
LED indicators
(current charge)
2.
Battery pack
venting areas
6.
Handle
3.
Battery pack
terminals
7.
Charger LED
indicator light
4.
Battery-charge-
indicator button
8.
Charger venting
areas
5. To remove the battery pack, slide the
battery backward out of the charger.
6. Refer to the following table to interpret the
LED indicator light on the battery charger.
Indicator light
Indicates
Off
No battery pack inserted
Green blinking
Battery pack is charging
Green
Battery pack is charged
Red
Battery pack and/or battery
charger is over or under the
appropriate temperature range
Red blinking
Battery pack charging fault*
*Refer to Troubleshooting for more information.
Maintenance
Maintenance and servicing are not required under
normal conditions. When you clean the surface of
the equipment, wipe it only with a dry cloth.
Do not disassemble the equipment; if it is
damaged, contact your Authorised Service
Dealer.
Storage
Important: Store the tool, battery pack, and
charger only in temperatures that are within
the appropriate range; refer to Specifications.
Important: If you are storing the tool for a
year or longer, remove the battery pack from
the tool and charge the battery pack until 2
or 3 LED indicators turn green on the battery.
Do not store a fully charged or fully depleted
battery. When you are ready to use the tool
again, charge the battery pack until the left
indicator light turns green on the charger or all
4 LED indicators turn green on the battery.
•
Disconnect the product from the power
supply (i.e., remove the battery pack) and
check for damage after use.
•
Clean all foreign material from the product.
•
When not in use, store the tool, battery
pack, and battery charger out of the reach
of children.
•
Keep the tool, battery pack, and battery
charger away from corrosive agents, such
as garden chemicals and de-icing salts.
•
To reduce the risk of serious personal
injury, do not store the battery pack
outside or in vehicles.
•
Store the tool, battery pack, and battery
charger in an enclosed clean, dry area.
Preparing the Battery Pack for
Recycling
Important: Upon removal, cover the terminals of
the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the
battery pack or remove any of its components.
Contact your local municipality or your
authorised Hayter distributor for more
information on how to responsibly recycle the
battery.