8
Printed in China
All rights reserved
© 2020 - Hayter Limited
Spellbrook, Bishop’s Stortford, Herts CM23 4BU
Safety and Instructional Decals
Setup
Mounting the Battery Charger
(Optional)
If desired, mount the battery charger securely on
a wall using the wall-mount key holes on the back
of the charger. Mount it indoors (such as a garage
or other dry place), near a power outlet, and out
of the reach of children.
Refer to Figure 1 for assistance in mounting the
charger.
Slide the charger over the appropriately
positioned hardware to secure the charger in
place (hardware not included).
101.6 mm
(4 inches)
Product Overview
Battery Charger
Model
Type
Input
Output
CODE120A
60V MAX Lithium-
Ion Battery Charger
100 to 240V
AC 50/60Hz
Max 2.0A
60V MAX
DC 2.0A
CODE121A
60V MAX Lithium-
Ion Battery Rapid
Charger
100 to 240V
AC 50/60Hz
Max 5.0A
60V MAX
DC 5.5A
Battery Pack
Model
Battery pack capacity
CODE102A
2.5 Ah / 135 Wh
CODE104A
4.0 Ah / 216 Wh
CODE106A
6.0 Ah / 324 Wh
CODE107A
7.5 Ah / 405 Wh
Battery manufacturer rating = 60V maximum and 54V nominal.
Actual voltage varies with load.
Appropriate Temperature Ranges
Charge battery pack at
5°C (41°F) to 40°C (104°F)*
Use battery pack at
-20°C (-4°F) to 49°C (120°F)
Store battery
pack/charger at
5°C (41°F) to 40°C (104°F)*
*Charging time will increase if you do not charge
the battery within this range. Store the tool,
battery pack, and battery charger in an enclosed
clean, dry area.
Operation
Charging the Battery Pack
Important: The battery pack is not fully
charged when you purchase it. Before using
the tool for the first time, place the battery
pack in the charger and charge it until the
LED display indicates the battery pack is
fully charged. Read all safety precautions.
Important: Charge the battery pack
only in temperatures that are within the
appropriate range; refer to Specifications.
Note: At any time, press the battery-charge-
indicator button on the battery pack to display
the current charge (LED indicators).
1. Make sure that the vents on the battery are
clear of any dust and debris.
2. Line up the cavity in the battery pack (Figure
2) with the tongue on the charger.
3. Make sure that the vents on the battery
charger are clear of any dust and debris.
4. Slide the battery pack into the charger until
it is fully seated Figure 2.
Figure 1