XX
TOWBAR
INSTALLATION INSTRUCTIONS
PART NUMBER
03276RW
FORD RANGER PX3 CL4 CN UTE
49-75 Pacific Drive Keysborough, VIC 3173
Phone: 1800 812 017
Email: [email protected]
Rev:
C
Page
6
Issue Date:
04-03-2020
4.
Towbar Fitment
NOTE: Two persons required to lift towbar up to
vehicle.
Insert the Nut plate into the passenger side of the
Chassis Rail and align with the holes, repeat on the
driver side.
Loosely secure the towbar side arm to the Vehicle
chassis rail via Nut plates using two M12 bolts and
washers on either side as shown.
5.
Bumper Fitment
5.1.
Fitment of Bumper step assembly for steel and
plastic version
Loosely secure the step mount bracket of the rear
bumper step assembly to the chassis rail via towbar
sidearm using 3 x M12 bolts complete with 1 x
washer.
NOTE: Use 1 x M12 Nut & Washer per side for the
hole that doesn't have a captive nut.
5.2.
Fitment of Bumper step for the factory fitted towbar
version
Loosely secure the towbar sidearm to the chassis rail
using three sets of M12 bolts and washers.
Loosely secure the step mount bracket of the rear
bumper step assembly to the chassis rail via towbar
sidearm using the retained M12 step bolts (2 Sets)
along with the supplied M12 flat washer and Nut.