background image

03/21     

Model SP158.15 

 

       Page 1 of 8 

 

 

 
 

1455 Kleppe Lane 

Sparks, NV 89431-6467 

 (775) 359-4712 

Fax (775) 359-7424 

E-mail: 

[email protected]

 

 website: 

www.hawsco.com

 

No. 0510001069 (2) 

 
 
 
 
 
 
 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

Model SP158.15 

Freeze Protection Valve 

 

INSTALLATION, OPERATION 

MAINTENANCE INSTRUCTIONS 

 

LIMITED WARRANTY 

 
HAWS warrants that this specific product is guaranteed against defective material or  poor workmanship 
for a period of 

one year from date of shipment

. HAWS liability under this warranty shall be discharged 

by furnishing without charge F.O.B. HAWS Factory any goods, or part thereof, which shall appear to the 
Company upon inspection to be of defective material or not of first class workmanship, provided that claim 
is  made  in  writing  to  Haws  within  a  reasonable  period  after  receipt  of  the  product.  Where  claims  for 
defects are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. 
HAWS will not be liable for the cost of repairs, alterations or replacements, or for any expense connected 
therewith made by the owner or his agents, except upon written authority from HAWS, Sparks, Nevada. 
HAWS will not be liable for any damages caused by defective materials or poor workmanship, except for 
replacements,  as  provided  above.  Buyer  agrees  that  Haws  has  made  no  other  warranties  either 
expressed  or  implied  in  addition  to  those  above  stated,  except  that  of  title  with  respect  to  any  of  the 
products  or  equipment  sold  hereunder  and  that  HAWS  shall  not  be  liable  for  general,  special,  or 
consequential damages claimed to arise under the contract of sale. 
 
The  emergency  equipment  manufactured  by  HAWS  is  warranted  to  function  if  installation  and 
maintenance instructions provided are adhered to. The units also must be used for the purpose for which 
they  were  intended.  This  product  is  intended  to  supplement  first-aid  treatment.  Due  to  widely  varying 
conditions, Haws cannot guarantee  that the use of this emergency equipment will prevent serious injury 
or the aggravation of existing or prior injuries. 
 

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED OR GIVEN BY 
HAWS.

 

 

NOTE TO INSTALLER: Please leave this information with the Maintenance Department. 

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS MODEL, 
PLEASE CALL:  
 

1-800-766-5612 

FOR PARTS CALL: 

 

1-800-640-4297  

 

  

 

Summary of Contents for SP158.15









Reviews: