Chain retightening
1 fixing screw
2 lag screw
3 Phillips screw
The mill is powered by an 8 mm industrial chain and equipped with a double-mounted
crank and grinding shaft. The translation is 1:2.7
If the chain needs to be re-tightened, loosen the fixing screw (1), to tighten use the 13 mm
lag screw on the left and the Phillips screw on the right of the unit - adjust both screws
evenly. Then tighten fastening screw (1) again.
Service
You can get Service-Tips from your hawos customer support team
Phone: 0049 (0) 61 72 -
40 12 00
Email:
-6-
3
1
2
