hd 680 DEI-V
ValiDoc Pro
Page GB 15
9.693.018
Version 1.06
3 Basic functions
3.1 Design and functions
3.2 Operation and sealing process
After the sterilization packaging has been inserted, the feed process is started
automatically by means of photoelectric cell.
The sterilization packaging is now fed and the sealing seam area is heated up to the set
sealing temperature by the heating units located at the top and bottom. The sealing
temperature is monitored.
The sealing seam, which is now heated, is pressed together by the sealing roller and
sealed.
The contact pressure and the sealing speed in monitored.
The finished sterilization packaging is transported to the extraction side.
If no item to be sealed is fed in, the feed switches off after approximately 30 seconds.
The set parameters remain saved after the device is switched on or off, or after a power
failure. The date and time are updated automatically (Autosafe).
Adjustable sealing
edge setting
T
emperature controller
Mains
Mains fuses
Power switch
Summary of Contents for HD 680 DEI-V
Page 75: ......
