17
• Always hold the equipment firmly in both
hands, with one hand on the rear handle and the
other on the front handle. Thumbs and fingers
must be firmly around the handles.
• Check the shoulder strap on a pleasant
position, which makes it easier
• for you to hold the hedge trimmer.
• Switch off the equipment immediately in
the event that the blades are blocked by solid
objects, pull out the power plug then remove the
object.
• Always work away from the mains power
outlet. Set the cutting direction before starting
work. Ensure that the power cable is kept well
away from the working area. Never lay the cable
over the hedge, where it could easily be caught
up in the trimmer blades.
• Avoid overstraining the equipment during work.
Waring! Pull out the power plug immediately if
the cable is damaged, badly twisted or has been
completely cut through.
f. Putting down the device
1) Place the device on the ground with the motor housing
first.
2) The safety cutter bar must be placed on the ground without
being subjected to any pressure.
3) Do not apply any static pressure whatsoever to the cutter
bar.
g. Swivelling the Arm
Caution! The gear box becomes hot during
operation. There is a risk of burns. Do not touch
the gearbox housing or the connecting point to
the front tubular shaft.
1). Release the indexing by pushing the safety slide forward.
2). The tubular shank can now optionally be turned 45° / 90°
to the right or the left (see the scale on the device).
h. Cutting Techniques
• Cut thick branches beforehand using a branch clippers.
• The double-sided cutter bar enables cutting in both
1
2