39
If This Happens...
Causes
Solutions
F.
Hard
Anodising Lightens
or is Worn Off on
Inside Base
Note: Lightening and wearing off of hard anodising cannot be restored and will not affect the functioning of the
cooker and cooking result; follow the three
Solutions
below to prevent further damage.
1.
Scouring with abrasive
plastic scrubbers, steel
wool or cleaning powder,
ash, bleach or soda
Wash only with non-abrasive cleaning products.
2.
Washing in dishwasher Hand wash. Do not put in a dishwasher.
3.
Deposits of salts and
minerals in water
Wash and wipe dry cooker after
every
use.
G.
Base of
Pressure Cooker is
No Longer Flat
1.
Overheating,
boiling dry
2.
Putting hot cooker
in water
3.
Long term use
Can be repaired only by a Hawkins Authorised Service Centre (see
Directory of Hawkins
Authorised Service Centres
, page 89).
H.
Yellow or
Brownish Stains in
Base of Cooker
Food stains accumulate
because cooker not washed
properly after every use
Rub stains with a non-abrasive cleaning powder such as 'Vim', a non-abrasive plastic
scrubber and a little water. To prevent such stains, wash cooker properly after
every
use.
I.
Food Spills
from Separator Set
While Cooking
1.
Too much food
in container
Reduce quantity of food and/or liquid. See
Maximum quantities of Various Foods
for the Hawkins Separator Sets
,
page 27.
2.
Too much water in
base of cooker and water
boils into container
Follow the water quantity to be put in cooker body given in
Maximum quantities of
Various Foods for the Hawkins Separator Sets
,
page 27.
•
