14
Setup Continued…
3) Once you have configured your Macs and PCs to obtain an IP address automatically, the
router’s DHCP server will automatically give your computers an IP address. By default the Hi-
Gain Wireless-108G MIMO Router’s DHCP server is enabled so that you can obtain an IP
address automatically. To see if you have obtained an IP address, see Appendix A.
Note
: Please make sure that the Hi-Gain Wireless-108G MIMO Router’s DHCP server is the
only DHCP server available on your network. If there is another DHCP or router on your
network, then you’ll need to switch one of the DHCP servers off. (To disable the Hi-Gain
Wireless-108G MIMO Router’s DHCP server see chapter 2 LAN Port)
4) Once your Mac or PC obtains an IP address from your router, enter the default IP
address
192.168.1.254
(Hi-Gain Wireless-108G MIMO Router’s IP address) into your Mac or PC’s
web browser and press <enter>
5) The login screen below will appear. Enter the “User Name” and “Password” and then click
<OK> to login.
Note:
By default the user name is “admin” and the password is “1234”. For security
reasons it is recommended that you change the password as soon as possible (in
Advanced menu/system/password, see chapter 2)
6) The
HOME
page screen below will appear. The
Home
Page is divided into four sections,
Quick Setup Wizard
,
Advanced Menu
,
Status Information
and
Tools.
Quick Setup Wizard
(Chapter 1)
If you only want to start using the Hi-Gain Wireless-108G MIMO Router as an Internet Access
device then you ONLY need to configure the screens in the Quick Setup Wizard section.
Advanced Menu
(Chapter 2)
If you want to use more advanced features that the Hi-Gain Wireless-108G MIMO Router has
to offer, then you’ll need to configure the Quick Setup Wizard and the Advanced menu
section. Alternatively, you can just configure the Advanced menu section, since the Advanced
menu/WAN and the Quick Setup Wizard contain the same configurations.
