Model No: HWRG1
28
Enable IP Filtering
Check to enable the IP filtering function.
Local IP Address
Enter the client IP address.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system
or service.
Description
You may key in a description for the local IP address
Current Filter Table
Shows the current filter information.
Save
After completing the settings on this page, click
Save
to save the
settings.
Reset
Click
Reset
to restore to default values.
MAC Filtering
Enable MAC Filter-
ing
Check to enable MAC filtering function.
MAC Address
Enter the client MAC address.
Description
You may key in a description for the MAC address.
Current Filter Table
Shows the current filter information.
Save
After completing the settings on this page, click
Save
to save the
settings.
Reset
Click
Reset
to restore to default values.
