Please follow below step to access the UI to configure the more function.
Wireless LAN Access Point Configuration
Getting Started
This Access Point provides web-based configuration tool allowing you to
configure from wired or wireless stations. Follow the instructions below to get
started configuration.
From Wired Station
1. Make sure your wired station is in the same subnet with the Access Point.
The default IP Address and Sub Mask of the Access Point is:
Default IP Address: 192.168.2.1
Default Subnet: 255.255.255.0
Configure your PC to be in the same subnet with the Access Point.
1a) Windows 95/98/Me
1. Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2. Double-click
Network
icon. The
Network
window will appear.
3. Check your list of
Network Components
. If TCP/IP is not installed, click the
Add
button
to install it now. If TCP/IP is installed, go to
step 6
.
4. In the
Network Component Type
dialog box, select
Protocol
and click
Add
button.
5. In the
Select Network Protocol
dialog box, select
Microsoft and TCP/IP
and then click
the
OK
button to start installing the TCP/IP protocol. You may need your Windows CD
to complete the installation.
6. After installing TCP/IP, go back to the
Network
dialog box. Select
TCP/IP
from the list
of
Network Components
and then click the
Properties
button.
