62
4-4-2. Date and Time
You can configure the time zone settings of your access point here. The date
and time of the device can be configured manually or can be synchronized with a time server.
Date and Time Settings
Local Time
Set the access point’s date and time manually using the drop
down menus.
Acquire Current Time
from your PC
Click “Acquire Current Time from Your PC” to enter the required
values automatically according to your computer’s current time
and date.
NTP Time Server
Use NTP
The access point also supports NTP (Network Time Protocol) for
automatic time and date setup.
Server Name
Enter the host name or IP address of the time server if you wish.
Update Interval
Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.
Summary of Contents for HOW17ACM
