•
You can access and view your network camera’s images via a web browser
using two methods:
1.
In your web browser’s address bar, type in
“http://
IPAddressofCamera”
.
2.
In the IP Setup window, click on
Link to selected
device
.
•
You can also use the included software application to view, record, and
playback the network camera’s images.
•
The example illustrated in the previous section “Step 4: Run the IP Setup
Program” deals with setting up an IP address to view the network camera
within
your LAN. For an example of how to view your network camera
outside of your existing LAN via the Internet, please refer to the section in
the user’s manual titled “
How to View Your Camera via the Internet
”.
•
If the image is blurry, this is most likely because the camera lens is out of
focus. To focus the lens, gently rotate the lens in either direction until the
desired level of focus is reached.
Please Note
: Do not aggressively turn or
overturn the lens, as this could lead to an unscrewing or damaging of the
lens.
•
It is highly recommended that you install the network camera(s) before
placing them in the desired physical location.
•
Ensure that the plug-in is installed. Refer to the user’s manual for details.
The plug-in enables display of the video in the browser.
You will likely
already have the plug-in installed
. If not, click on “Yes” in the prompt
window that appears to install the plug-in. If the web browser is not
allowing you to install the plug-in, it is most likely due to your Internet
security settings. You will need to adjust them to install the plug-in. Refer
to the user’s manual for details.
24
