Hawking Hi-Gain HWREN2, User Manual

Page: 47 / 64

39
3-2-2 IP Address of the Wireless Range extender
You can change the IP address of this wireless range extender so it can
become a part of your local network. Please remember this address or you
will not be able to connect to the configuration menu of this wireless
range extender.
Default IP address: 192.168.1.240 / Subnet Mask: 255.255.255.0.
You can press and hold ‘Reset’ button 15 seconds, then power off/on to
change the IP address back to default value if you forget the IP address
you set.
To change IP address, please click ‘System Utility’ sub-tab, and the
following message will be displayed:
Please input IP address and Subnet Mask in corresponding field, and you
can input the IP address of gateway in the ‘Gateway Address’ field, if you
need to manage this wireless range extender from another network (like
the Internet).
If you want to activate the DHCP server function of this wireless range
extender, select ‘Enabled’ in ‘DHCP Server’ option. Please go to section
3-2-3 for DHCP settings. If you don’t want to use DHCP server
function of this wireless range extender, or there’s another DHCP server
on the network, please select ‘Disable’. The default mode for the
DHCP server is ‘Disable’.