Hawking Hi-Gain HW7ACX, User Manual

Page: 15 / 88

8
Chapter II: Quick Setup and Basic Settings
2-1 Installing the HW7ACX
Complete the following instructions to build the network connection
between your new wireless range extender and your computers or network
devices:
1.
Connect the range extender to your computer (source) through the LAN
port of the range extender by Ethernet cable or connect to it wirelessly.
2.
Connect the A/C power adapter to the wall socket, and then connect it to
the ‘Power’ socket of the range extender.
3. Please check all LEDs on the front panel. LAN LEDs should be on if the
range extender is correctly connected to the router. If it is not on, or any
LED you expect is not on, please recheck the cabling, or jump to
‘5-2
Troubleshooting’
for possible reasons and solutions.