- 10 -
TURNING THE FISH FINDER ON/OFF
1. To turn the fish finder ON, press and release the
button.
2. To turn the fish finder OFF, Press and Hold the
button for 3 seconds.
N
OTICE
:
The fish finder has an automatic “power-off” feature to prevent
battery drain if you accidentally leave the Fish Finder on. When the
depth display reads “---” continuously for 5 minutes, the display will
shut off automatically.
SETTING THE FISH FINDER IN SIMULATION MODE
1. To place the fish finder in Simulation Mode, while the fish
finder is ON, press and release the
button 2 times
(MENU II will appear at the top of the screen)
2. Press and release the
button until Simulator is highligted.
3. Press the
to turn ON the similator mode
(
will
appear to the right of Simulator).
4. Press
V | ESC
to exit the menu and start running the simulator.
5. To turn the simulator mode OFF, repeat steps 1 thru 3 above.
N
OTICE
:
All features are active in the simulator mode. Use the FishTrax™
simulator to learn how to use the fish finder. The simulator allows you
to adjust features and settings like you are actually operating the fish
finder. Please note that the temperature will be displayed as “---“
unless the Sonar Sensor (
Transducer)
is plugged into the display.
ACCESSING AND ADJUSTING THE FEATURES
To simpify the operation of the FishTrax™ 1X many of the complex features such
as gain
(power)
, interference
(noise rejection),
sonar frequency and sonar beam
angle
are adjusted automatically. However there are several features that can
be manually adjusted.
A.
Screen Detail (Sensitivity)
B.
Backlight
C.
Depth Range