Hawke 46101, Manual

Page: 13 / 85

13
arrows to move between Hours and Minutes – Use the up and down arrows to edit the selected
number – Press “OK” to confirm.
Car Plate
Captures car license plates when still or moving. Note: The
“PHOTO”
/
“VIDEO”
/
“BOTH”
mode
button on the camera must be on “PHOTO” mode. The camera has several shutter speed levels.
Choose between 1/60s, 1/125s, 1/250s, 1/500 and 1/1000s. 1/1000s is the fastest shutter speed,
intended for fast moving cars. You can also select
“OFF” to close this function. SETTINGS –
Advance
–
Car Plate
– Use the left, right, up and down arrows to move between
OFF
,
1/60s
,
1/125s
,
1/250s
,
1/500s
and
1/1000s
– Press
“OK”
to confirm.
IR Flash
Sets the brightness of the infrared flash. There are three options: Full Light, 2/3 Light and 1/3 Light.
Choose Full Light to get the brightest image or to reach far targets. Select 2/3 Light or 1/3 Light to
save battery or for targets closer to the camera.
SETTINGS
–
Advance
–
IR Flash
– Use the left
and right arrows to move between Full Light , 2/3 Light and 1/3 Light – Press “OK” to confirm.
SETTINGS: SYSTEM
Camera ID
Sets the name of the camera, which is stored on each photo and video. The Camera ID is six
characters long and can be set from A-Z, 0-9.
SETTINGS – System – Camera ID – Use the left