Commissioning - Software
MiniWave
User Manual
7
Startup
The MiniWave uses automatic sensitivity control to detect and maintain the level. After applying power to the
unit allow 20-30 seconds for the unit to adjust to the application*.
Parameter
Description
Options
Display Mode Set LCD measurement display mode
Level
% Level
Space
Volume*
Display Unit
Adjust displayed measurement unit
MilMetre
CenMetre Metres
Feet
Inches
Low Level
Set Low level measurement point (4mA)
Adjustable
High Level
Set High level measurement point (20mA) Adjustable
Damping
Adjust output response time & smoothness
Adjustable in seconds
Failsafe
Set failsafe output
3.50mA
4mA
3.80mA
20mA
20.20mA
LastKnown
Setup
Main Menu
Setup
Advanced
Autoset
Setup
Display Mode
Display Unit
Low Level
Hi Level
Damping
FailSafe
Advanced
Comms
Echo Size
Lock Code
Analogue
Language
Autoset
See (B) Autoset
Main Menu
Setup
Advanced
Autoset
Setup
Display Mode
Display Unit
Low Level
Hi Level
Damping
FailSafe
Advanced
Comms
Echo Size
Lock Code
Analogue
Language
Autoset
See (B) Autoset
AutoSet
Use AutoSet to scan and program the unit High or Low level to the distance detected. After the scan you will
be prompted to accept the distance measured. The High and Low level can also be manually adjusted in
'Setup'.
185 mm (7.3”)
52mm
(2”)
72mm (2.8”)
47mm (1.85”)
2" BSP or
NPT THD
85mm (3.4”)
M20
Cable
Gland
M20 Blank Plug
+
-
23mm (0.9”)
+
-
CAL
RUN
Space
1.402m
17.2mA
m i n i w a v e
Space
1.402m
17.2mA
Set Lo Level
Set Hi Level
AutoSet
SCANNING
Set Lo Level
No
Yes
2.597m
Set Lo Level
185 mm (7.3”)
52mm
(2”)
72mm (2.8”)
47mm (1.85”)
2" BSP or
NPT THD
85mm (3.4”)
M20
Cable
Gland
M20 Blank Plug
+
-
23mm (0.9”)
Flip Lid
to access
terminals
+
-
CAL
RUN
Space
1.402m
17.2mA
m i n i w a v e
Space
1.402m
17.2mA
Set Lo Level
Set Hi Level
AutoSet
SCANNING
Set Lo Level
No
Yes
2.597m
Set Lo Level
Main Menu
To access the Main menu press
To access AutoSet menu press and hold for 3 seconds
*For best results ensure there is a
liquid level present in the application
or flat surface below the transducer
* Volume mode requires PC with GoshawkII software. Consult dedicated MiniWave GoshawkII Manual
