
Trouble Shooting 75
Trouble Shooting
Trouble Shooting
-
pletely full of contaminants. If the
red
indicator
button
on
the hydraulic filter body pops
up
,
change
the
filter
element
. See Filter Maintenance.
Check
that
no hissing
sound comes from the Winch On
or Winch Off button. An
air hose
is
broken, switched
or
disconnected
if there is a
hissing sound
.
Locate
the
leak
, and
replace
the
hose
or
connect
the
hose
prop-
erly. See Drawings.
Check
that the Winch On and Winch Off
button air
valves
work.
Disengage
the
winch.
See Installation.
Push
in the
button
. Air should
sound
like it is being
sharply inhaled
.
Release
the
button
. Air should
sound
like it is being
sharply exhaled
. If these sounds do not
occur,
replace
the Winch On and/or Winch Off
button
air valve
. See Drawings.
Check
the Winch sandwich valve
H6 flow setting
. No
fluid will flow to the Winch if the flow setting is rotated
clockwise to refusal. See Trouble Shooting, “
Winch
moves at an undesired speed
”.
Use a 7/32" allen wrench to
adjust
the Winch sandwich
valve
H6 flow settings at each end
. See Drawings.
Rotate clockwise
to
reduce speed
and
counter-clock-
wise
to
increase speed
of the winch on and off the pipe.
Use
Winch On
and
Winch Off to test
. Repeat process
if necessary.
The low torque warning poppet pin #061-30064 and
#061-20238 poppet seat may have seal damage or the
bellville springs #061-022S need replacement or correct
placement. See Drawings. To check
poppet seal dam-
age
, refer to page 24 for
LOW TORQUE WARNING
TEST #1 PROCEDURES
.
The low torque warning
small “U” cup seal is leaking
.
Replace the seal
. Make sure the
seal is installed with
the top of the “U” facing in
. Order Hawk # 061-LTW-
RK. See Drawings. Refer to
LOW TORQUE WARN-
ING TEST #2 PROCEDURES
.
The Tilt Cylinder moves at an undesired
speed.
The Low torque warning system Test #1
has failed.
The Low torque warning system Test #2
has failed.
Problem
Remedy
.
.
.
.
.
.
Summary of Contents for HAWKJAW 100K-2GSR
