5
INSTALLATION OF MAIN SYSTEM COMPONENTS
Great care has been take in the design and manufacture of HAWK products, Correct installation and
good working practices will enhance the operation of the alarm system and give long term benefit to
the user.
1.
position and attach the Control unit
2.
position and attach the LED Alarm indicator
ALARM WIRING
Plan where to make the connections to the motorcycle wiring loom. The alarm loom should run
alongside the original motorcycle loom taking full advantage of the motorcycle wiring loom
integrity. Normally all connections can be made to a central area on the motorcycle loom, such as
under the petrol tank.
NOTE: Soldered joints are recommended for all wiring connections.
Common wiring diagram of various bikes (guidance only).
ALARM WIRING INSTALLATION
IMPORTANT
Make sure that you have planned the wiring connections before adapting / cutting the alarm loom or
the motorcycle loom.
1. Connect RED wire to constant power input (+) 12v supply from the battery.
2. Connect BLACK wire to any wire in the ignition system which becomes live when
the ignition is switched ON, and remains live when the starter is pressed e.g. power
feed from ignition switch to fuse box.
3. Connect ORANGE wire to left indicator positive (+) lead output. Take care not to use
the motorcycle indicator negative (-) wire.
4. Connect LIGHT BLUE wire to right indicator positive (+) output. Take care not to
use the motorcycle indicator negative (-) wire.
5. Connect YELLOW/RED wire to the remote starter (+) lead output.
Cables of HA-MC01 v2
Function
HONDA
SUZUKI
YAMAHA
Red
Positive
Red
Red
Red
Green x 2
Negative
Green
Black/White
Black
Orange
Indicator
Orange
Dark Green
Dark Green
Light Blue
Indicator
Light Blue
Black
Dark Brown
Black
Ignition positive
Black
Orange
Brown
Grey
Immobiliser (1)
Grey
Immobiliser (1)
White/Black
Immobiliser (2)
Black/White
Immobiliser (2)
Yellow/Red
Remote Start
Yellow/Red
Yellow/Green
Blue/White
