20
HawkExcavator.com
6.0 INSTALLATION AND TRANSPORTATION
6.1 TRANSPORTATION
For transportation purposes, all parts of the AT300-V2/AT300PS-V2 must be disassembled
before being loaded onto the truck trailer. Follow the instructions in section
“
6.4
DISASSEMBLING
THE MACHINE”
to do the disassembly process. Load the amphibious
parts carefully and make sure they are well placed and secure.
6.2 ASSEMBLING THE MACHINE
After unloading the transport, the reassembly sequences are as follows:
1.
Get a crane of the required reach and size to lift the excavator undercarriage. Select an
area of flat, level ground, large enough for the whole machine. Place and align the left
and right undercarriage body components with the correct distance between them. Refer
to Figure 6.2.
WEAR PLATE
WEAR PLATE
Figure
5.7:
Wearing
Plate
