10
Appendix
10.1 Technical data
Type-specic parameters are listed on the product’s type plate, e.g.: Data on motor and pump
power.
For further technical data, refer to HAWE publication
D 8010
.
"Applicable documents", page 5
General information
Conformity
■
"Declaration of incorporation (Machinery Directive)", page 58
■
"Declaration of conformity (Low Voltage Directive)", page 59
■
UL conformity of the stators - UL reference E216350
■
UL conformity of the fans F, F1 - UL reference E216350
Designation
Hydraulic power pack
Design
Valve-controlled radial piston pump or gear pump
Model
Compact hydraulic power pack (closed unit with a pump, electric drive and tank)
Operating mode
■
Short period operation (S2) and
■
Periodic intermittent operation (S3)
Material
Housing: Aluminium
Attachment
M8 threaded holes, see dimensioned drawings
Mounting position
Vertical (KA...S) or horizontal (KA...L)
Line connection
only via bolted-on connection blocks
Basic pump: see mounting hole pattern
Rotation direction
Radial piston pump – any
Gear pump – anticlockwise
(Rotation direction only ascertainable from check of delivery ow; if there is no delivery ow in the 3-phase
version, replace two of the three main conductors)
Speed range
Radial piston pump H:
100 to 3500 rpm
Gear pump
Z 1.1 ... Z 2.7:
Z 3.5 ... Z 8.4:
Z 8.8 ... Z 11.3
800 to 4000 rpm
500 to 3800 rpm
500 to 3500 rpm
56/61
B 8010 - 04-2021 - 1.0
HAWE Hydraulik SE
