2
For your safety
The product is built according to the state of the art and recognized safety regulations.
Nevertheless, there is a risk of personal injury and damage to property if this chapter and the safety
instructions in this manual are not observed.
2.1 Intended use
■
The product is a technical work tool and intended for commercial and industrial use only.
■
The product may only be operated in accordance with the technical data, operating conditions and
performance limits specied in this manual.
■
Only use original accessories and original spare parts approved by the manufacturer.
■
The product may be used outdoors and indoors.
■
The product is used for the infinitely variable locking of passenger restraint systems on seats in
amusement rides and ying structures.
■
Any rides that are operated as ying structures on the territory of the United States of America are
excluded from said use.
■
Forces may only be transmitted to the locking unit by way of articulated lugs.
■
Use the product only after undergoing training by the seat or ride operator.
Partly completed machinery
The product is a partly completed machine according to the EC Machinery Directive 2006/42/EC and
is intended exclusively for installation in a machine or system. The product is controlled via the
manufacturer's machine / plant control.
►
Comply with the manufacturer’s operating instructions.
2.2 Misuse
■
Use in other operating modes than specied in the intended use
■
Using the product beyond the specied performance limits
■
Do not convert the product or modify it in any way.
■
Do not paint over elastic sealing parts, bearings of moving parts and hose lines.
■
Do not use this product in potentially explosive atmospheres.
2.3 Residual risks
When handling hydraulic uid, comply with the safety data sheet of the manufacturer of the
hydraulic uid.
HAWE Hydraulik SE
B 6052-21 -
11
-2021 - 1.7
9/63
