English
13
OPERATION
Assembly
1. Take all parts out of the box and remove all packing material.
2. Unscrew the grill screw (P7) from the motor unit (P1).
3. Place the rear grill (P6) onto the motor unit (P1) and attach it by the grill screw
(P7).
4. Place the fan blade (P8) onto the motor shaft (P15).
5. Attach the vane (P13) to the front grill by the screws (P12).
6. Put the front grill (P9) on the rear grill (P6) and secure it with the clips (P11) and
screw (P14).
7. If needed, you can adjust the air flow angle by the joint (P3).
Note:
Make everything in reverse procedure to disassemble the unit.
Use
1. Connect the assembled fan to a wall outlet.
2. Start the fan by pressing on one of the buttons on the fan base (P5). Press the
0 button to turn off the fan.
Button (1) – Low fan speed
Button (2) – High fan speed
Button (0) – Off
Oscillation
1. To activate the oscillation (rotate from side to side), press the oscillation knob
(P2).
2. To stop oscillation, pull the oscillation knob P2 out.
Cleaning and maintenance
–
Wipe the fan regularly with a well wrung cloth, and always keep the grill free
of dirt. Never use corrosive or abrasive detergents, as these may damage the
plastic parts of the fan.
