background image

Before Beginning

Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-ZEB-300 Series Docking 
Station for the Zebra ET4X 8” Tablet with Zebra’s 8” Rugged Boot (Required), and the Zebra ET4X 10” Tablet with Zebra’s 
10” Rugged Boot (Required).
For questions regarding the set-up of your DS-ZEB-300 Series Docking Station please contact Havis at 1-800-524-9900 or 
visit www.havis.com for additional product support and information.

This Owner’s Manual applies to the following Product Numbers:

DS-ZEB-301
DS-ZEB-302-ISO
DS-ZEB-303

DS-ZEB-304
DS-ZEB-305-ISO

NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.

DO NOT USE TABLET WHILE DRIVING. 

THE ZEBRA ET4X RUGGED BOOT (EXOSKELETON) IS REQUIRED:

The DS-ZEB-300 series docking station is only compatible with ZEBRA’s ET4X 8” and 10” tablets 
equipped with Zebra’s Compatible 8” Rugged Boot or 10” Rugged Boot installed on their respective 
devices. The Zebra ET4X tablets must have their respective Rugged Boots installed to ensure safe
and proper function of the dock and tablet solution.

READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION. 

DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC. 
ARE PRESENT

FOR THE DS-ZEB-303:  DO NOT CONNECT THE TABLET DIRECTLY TO  THE VEHICLE VOLTAGE SOURCE: The Zebra 
ET4X Tablet requires a certified Zebra approved power source. Failure to comply with this requirement will 
cause product damage that is NOT repairable and is NOT covered under warranty.

Precautions

Do not place metal objects or containers of liquid on top of the Docking Station.

If a malfunction occurs, immediately unplug the Power Supply and remove the tablet.

Use only the specified Power Supply Cable with this Docking Station (DS-DA-317 or DS-DA-336).

Do not connect cables into ports other than what they are specified for.

Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) 
for a long period of time.

Summary of Contents for DS-ZEB-300 Series
















Reviews: