![Havis DS-DELL-400 Series Owner'S Manual Download Page 3](http://html1.mh-extra.com/html/havis/ds-dell-400-series/ds-dell-400-series_owners-manual_2108678003.webp)
2)
With rear of computer elevated, load front of computer into Docking Station
by aligning Front Hooks with the appropriate recesses in the computer.
3)
Lower back of laptop onto the Docking Station, ensuring Docking Connector
and Locator Pins are aligned.
4)
With computer seated on the Docking Station; - apply downward pressure to
rear center of laptop and, - pull out the Front Latching Handle until it clicks.
Table of Contents
10
3
Specifications
Parts Included
Antenna Identification
Port Replication Capability
Installation
Cable Management
Operation - Initial Laptop Adjustment
Operation - Docking
Operation - Undocking
3
3
4
5
6
7
8
9
11
Specifications
Power Supply
Input
DS-DELL-401/401-3/402/
402-3/405/405-3/406/406-3 External Power Supply (LPS-137 DC-DC)
19.5V DC-In
DS-DELL-404/404-3/
407/ 407-3
Internal Power Supply (DS-DA-316 Cable) 10-17 VDC
Dimensions
10.8” ( 27.6 cm) H x 12.4” ( 31.5 cm ) W x 2.7” ( 6.9 cm ) D
Weight
5.5 lbs ( 2.49 kg )
Operating
Environment
-29° C to 63° C ( -20° F to 145°F )
Storage
Environment
-40° C to 85° C ( -40° F to 185° F )
• Do not place metal objects or containers of liquid on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
• Use only the specified Power Supply
(Part # LPS-137)
with this Docking Station,
or Internal Power Supply cable
(Part # DS-DA-316)
with Internal Power Supply Docking Stations.
• Do not store, install, or operate the Docking Station where water, moisture, steam, dust, etc. are present
• Do not connect cables into ports other than what they are specified for
• Do not leave the Docking Station in a high temperature environment (greater than 71°C, 160°F)
for a long period of time
Precautions
Operation - Docking
(continued)
Push
Pull
Parts Included
Hardware Kit
(HWK-0025)
This Hardware Kit includes:
1. Zip Ties (6)
2. Keys (2)
3. 1/4”-20 x 5/8” long
Button Head Screws (9)
Tools required for installation:
• 5/32” Hex Drive
(For attaching Mounting Bracket to Motion Device
with Button Head 1/4”-20 Screws)