www.havis.com • 1-800-524-9900
8
5
Cable Management
1)
Tip the Docking Station to a position that is comfortable to work with.
2)
Install power cable are necessary for your computing needs.
3)
Use Zip Tie (Hardware Kit Item 1) to strain relieve cable. Use a Strain Relief
Point to anchor the cable. If desired for routing purposes, additional Strain
Relief Points on each side of Docking Station may be used.
4)
Create a service loop with the cable to ensure that no tension is on the
connector and to enable intended motion.
5)
Tie off the cable onto a stationary part of the mounting system.
Collect cable and secure
to the mounting system.
(Note: Mounting system not included)
This loop must be large enough
to allow full range of expected
rotation and extension without
stressing connection.
Docking Station
Parts Included
FRONT
All Models
Barrel Lock
Docking Connector
Latch Handle
Latch Tab
Locator Pin
BACK
Strain Relief
Ports
Mounting Hole
(x4)
