www.havis.com • 1-800-524-9900
DS-APP-102
PKG-DS-APP-102
PKG-DS-APP-112
PKG-DS-PAN-122
PKG-DS-PAN-132
Before Beginning
(Original Instructions)
2
11
Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-APP-100 Series Docking Station for
the Havis iPad Protective Case.
For questions regarding the set-up of your DS-APP-100 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.
Use the supplied power cable to charge your iPad once its securely docked.
Plug barrel connector into the back of the Docking Station, and the cigarette
lighter adaptor into the vehicle power source.
This Owner’s Manual applies to the following Part Numbers:
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
Supplying Power to iPad
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
To Vehicle Power Source
To Docking Station
EC DECLARATION OF CONFORMITY
in accordance with EN 45014
Manufacturers Name:
Havis, Inc.
Manufacturers Address:
47801 Anchor Court, Plymouth Twp, MI 48170 USA
Declares under our sole responsibility that the product:
Product name: Havis Docking Station For Havis iPad Protective Case
Model: DS-APP-1XX, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment -
Radio disturbance characteristics - Limits and methods of measurement
EN 55024:2010, Information technology equipment - Immunity characteristics -
Limits and methods of measurement
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
BS EN 50498:2010:
Section 7, after market electronic equipment in vehicles.
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires the
use of the provided e-Marked automotive power supply when used within vehicles.
Plymouth twp, MI, USA
March 14, 2014
Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance:
This is an FCC Class B device. Any changes or modifications
to the model DS-APP-1XX not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
