C-VS-2000-DUR-1_INST_8-17
Remove bolts at lower front of
console and the screws at forward
lower dash. (save hardware)
(10 mm and 7 mm sockets)
Remove screws for the rear side trim
panels, Arm rest hinge and the Manual
Park Release pull strap.
(Phillips screwdriver)
Note: See owner’s manual section
“What to do in Emergencies”
for more Park Release information.
Remove storage pocket in order to
access and remove Manual Park
Release pull strap assembly from
OEM mount.
Remove bolt cover at lower rear
end of console. (one each side).
Remove bolts and save.
(10 mm socket)
Remove screws for the rear side
trim panels.
(Phillips screwdriver)
Carefully Unplug and Unclip wire
harness from OEM console base so
the base can be removed.
Remove screws for the storage
pocket.
(Phillips screwdriver)
Flip console base upside down and
remove air duct. Remove Manual
Park Release cable from bottom of
OEM plastic console base.
Note: DO NOT disconnect or remove
cable assembly from vehicle.
Remove remaining wire harness
from OEM console base and
reconnect to main harness.
View with OEM center console
removed.