HAVERLAND UK LIMITED
Challenge House, Sherwood Drive
Bletchley, MK3 6DP
Tel: 0030 3651940
– Fax: 01672 811944
15/11/2020
8. OPEN WINDOWS
This function is activated by default. Th
is function activates when there is a sudden drop in the room’s
temperature. The radiator will disconnect to avoid losing energy. Once the temperature of the room is
stable again, the radiator will return to the state it was in before it was disconnected.
To deactivated it, the radiator must be first on the AUTO setting, therefore, press the button until you
see “AUTO” on the top left corner of the display.
Now press and hold
, 4 horizontal lines will appear, and number 1 will be displayed on the right-hand
corner. Use the UP or DOWN buttons until
8
is on the right-hand corner (YES will be displayed), press OK
and use the UP or DOWN
to set it to “no”
and press OK to confirm.
To exit the temperature menu please press
.
9.
INTELLIGENT FUNCTION “ITCS”
This function is activated by default. Its start-up of the machine in advance of the programmed time (2
hours maximum), to ensure that the required temperature is achieved at the indicated time and
following the established weekly program.
To deactivated it, the radiator must be first on the AUTO setting, therefore, press the button until you
see “AUTO” on the top left corner of the display.
Now press and hold
, 4 horizontal lines will appear, and number 1 will be displayed on the right-hand
corner. Use the UP or DOWN buttons until
9
is on the right-hand corner (YES will be displayed), press OK
and use the UP or DOWN
to set it to “no”
and press OK to confirm.
To exit the temperature menu please press
.
10.
CONSUMPTION INDICATOR “ConS”
This function allows you to know your electricity consumption in the last 24 hours, the last 7 days, the
last 30 days or since you bought by pressing successively the
OK
button.
To access it, the radiator must be first on the AUTO setting, therefore, press the button until you see
“AUTO” on the top left corner of the display.
Now press and hold
, 4 horizontal lines will appear, and number 1 will be displayed on the right-hand
corner. Use the UP or DOWN buttons until
10
is on the right-hand corner (ConS will be displayed), press
OK and use the UP or DOWN to select between 1d, 7d or 30d and press OK to confirm.
To exit the temperature menu please press
.
