1) the appliance is put into standby mode by pressing standby
button.
2) the appliance suffers power disconnection.
You need to set again by pressing M for 3 seconds if you need this function.
6. Window detector function
Press
to enter window detecor function. Then press “
/
” to choose “ON” or “OFF”.
If “ON” is selected, the window detection function is activated and
icon will show on the
screen. When temperature decrease detected, the appliance will automatically enter anti-freeze
mode with
icon flashing. If temperature rises up, the appliance will go back to previous
mode with
icon on. You can choose “OFF” to inactivate the window detection function.
Remarks: the window detector function is not available under anti-freeze mode.
7. In case of power failure
If the power supply is cut, after recovery, the unit goes into standby mode. You can press the
button to return to the selected mode and temperature before the power failure.
The device keeps in memory only the parameters: temperature and operating mode. When the
power is turned back on, When power is restored, the clock must be set again to operate the
various programs correctly.
TECHNICAL SPECIFICATIONS
Information requirements for electric local space heaters
12
Model
Voltage
&
Frequence
Rated
Power
Product dimension
L X W X H
(in mm)
Class
Protection
Index
HT10PD
230V- 50Hz
1000W
564*110*450
CLASS II
IPX4
HT15PD
230V- 50Hz
1500W
714x110*450
CLASS II
IPX4
HT20PD
230V- 50Hz
2000W
864x110x450
CLASS II
IPX4
Model identifier(s): HT10PD
Item
Symbol
Value
Unit
Item
Unit
Heat output
Type of heat input, for electric storage local space
heaters only (select one)
Nominal heat output
P
nom
x,x
kW
manual heat charge control, with
NA
