HAUVREX HXL6128, Operation & Maintenance Manual

Page: 10 / 24

Installation/Operation & Maintenance Manual
HXL6128 MID-RISE SCISSOR LIFT
Model……………………….…………...…Gear Pump
Max. Flux……………….........................………4.3cc/r
Joint Type……………...........……Joint Overfull Valve
Continuous Working Pressure…………….210bar
Intermittent Working Pressure…………150~300bar
Inject 15 litters of wearable hydraulic oil into the
oil tank.
Lift Dimension Picture:
Fig. 2 Lift Dimension
TYPES OF VECHLES SUITABLE FOR:
This lift are suitable for virtually all vehicles with total
weight not exceed than 2800Kg
THE LOWER PARTS OF THE VECHILE
UNDERBODY COULD INTERFERE WITH
STRUCTURAL PARTS OF THE LIFT, TAKE
PARTICULAR PARTS OF THE SPORTS-CAR.
The lift will also handle customized or non-standard
vehicles provided they are within the maximum
specified carrying capacity.
Also the personnel safety zone must be defined in
relation to vehicle with unusual dimensions.
Read this chapter carefully and
completely since important information for the
safety of the operator or others in case of
improper use of the lift is included.
In the following text there are clear explanations
regarding certain situations of risk or danger
that may arise during the operation or
maintenance of the lift, the safety device
installed and the correct use of such systems,
residual risks and operative procedures to use
(general specific precautions to eliminate
potential hazards).
Lifts are designed and built to lift
vehicles and hold them in the elevated position
in an enclosed workshop. All other uses of the
lifts are unauthorized. In particular, the lifts are
not suitable for:
●
Washing spray work;
●
Creating raised platforms for personnel or lifting
personnel;
●
Use as a press for crushing purposes;
●
Use as elevator;
●
Use as a lift jack for lifting vehicle bodies or
changing wheels.
The manufacturer is not liable for any
injury to persons or damage to vehicles and
other property caused by the incorrect and
unauthorized use of the lifts.
During lifting and descent, the operator must remain
in the control station as the diagrams illustrated.
As the diagrams illustrated: The presence of
persons inside the danger zone indicated is strictly