462-IN-INS-LAB-RevA16
15
3.6 RETRACTO RAIL OPERATION
(Models 462EMCST, 462FMCST, 462GMCST,
462HMCST)
WARNING
—
–PROPER OPERATION
HAZARD:
Patient entry, egress and transfer
should always be done with caster
braking system locked.
Caster braking system should always be
locked and patient side rails in upright
locked position when patient is left
unattended.
3.6.1 Raising the Retracto Rail
Grasp rail top cap in the middle of the rail
(Figure 3-16), and lift.
3.6.2 Half Height Retracto Rail
Grasp the rail (Figure 3-16) and lift up on
red trigger under the litter top (Figure 3-17)
while lowering rail. When rail starts to move
down, release trigger. Lower rail until it locks
into half height position.
3.6.3 Lowering the Retracto Rail
Grasp the rail (Figure 3-16) and lift up on
red trigger under the litter top (Figure 3-17)
while lowering rail. Hold the trigger up until
the rail is all the way down.
CAUTION: When lowering the rails,
ensure patient and caregiver (or
attendant) body and extremities are
clear of pinch points before operating
the rail.
WARNING: Always ensure side rails are
in upright locked position before leaving
patient unattended.
Figure 3-18
Figure 3-17
Figure 3-16
Summary of Contents for HORIZON 462APAST
Page 24: ......
