20
ENGLISH
SAFETY RULES
6. All parts of the product, safety devices in particular, must be correctly
installed to ensure faultless operation.
OPERATION/WORKPLACE
7. KEEP GUARDS IN PLACE and in working order.
8. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking
to see that keys and adjusting wrenches are removed from tool before
turning it on.
9. KEEP CHILDREN AWAY. All visitors should be kept safe distance from
work area.
10. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by
removing starter keys.
11. DON'T FORCE TOOL. It will do the job better and safer at the rate for which
it was designed.
12. USE RIGHT TOOL. Don't force tool or attachment to do a job for which it
was not designed.
13. DON'T OVERREACH. Keep proper footing and balance at all times.
14. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is
in off position before plugging in.
15. DIRECTION OF FEED. Feed work into a cutting disc against the direction
of rotation of the blade or cutter only.
16. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't
leave tool until it comes to a complete stop.
17. The product may be used only when in a faultless condition. If the product
or part of the product is defective, have it repaired by an expert.
18. Always follow the applicable national and international safety, health and
labour regulations.
19. The product may only be put into operation if no faults are found during
the inspection. Ensure that any defective parts are replaced before the
product is used again.
20. Position the product horizontally on a rigid, even surface with adequate
load-bearing capacity.
21. Do not leave any tools, objects or cables lying in the working range of the
device.
22. Ensure that there is sufficient lighting during operation.
23. Assume a natural and secure stance when working.
24. Make sure that during operation, no body parts or clothing are caught
and drawn in by rotating components.
25. The immediate environment must be free of combustible and other
flammable or explosive substances.
26. Young people under 18 years of age and users who are not sufficiently
familiar with its operation must not use the product.
27. Persons unable to safely and carefully use the tool for physical,
psychological and neural reasons must not use the product.
28. Work with caution and only if you are physically fit: Working under the
effects of fatigue, illness, alcohol, medication and drugs is irresponsible,
as you are unable to use the product safely.
SERVICE
29. DISCONNECT TOOLS before servicing; when changing accessories, such
as cutting discs and the like.
30. Have your electrical tool repaired only by qualified technicians, using
only genuine spare parts. This will maintain the safety of the electrical tool.
31. DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power tools in
