30
ASSEMBLY
ENGLISH
Fig. 12
Fig. 13
16. Separate the outside slide from the drawer slide.
17. Fully extend the slide, lift release lever on outside of drawer slide and
pull apart.
18. Attach outside sides (4) to the slots in the slide carriers. Rotate slide
down so the front lance of the slide locks into the front slot of the slide
carrier. See Figure 12.
19. Insert rear tab of drawer slide into slot on the drawer and pull towards
the front of the drawer.
20. Rotate upward until the front tab engages the slot on the drawer
securing the slide.
21. Install the drawer by inserting the drawer slides into the installed
outside slide. Make sure that the slides on both sides line up. Push the
drawer until it is fully closed. The drawer is now sercurely in place. See
figure 13.
Release
Drawer Slide
Outside Slide
Back
Front
JJ
JJ
KK
KK
Summary of Contents for 6882.468 53305014
Page 32: ...6882468 2010 ...